記錄型紫外線強度計UVC-254SD特征
* UVA, UVC光在同一個儀表測量。
*長波365 nm紫外線輻照度測量。專業長波紫外線照度計,用于測量UVA(黑光)光源下的UVA輻射值。
*短波長254 nm的紫外輻照度測量。專業的UVC光表,用于測量紫外線光源下的UVC輻射值。
*兩個范圍: 2 mW/cm^2, 20 mW/cm^2
*的紫外線傳感器結構與金屬外殼。
*紫外線低壓傳感器與余弦校正濾波器
*紫外線測試功能建立零按鈕。
*紫外光測量的應用:監測藍光輻射危害焊接、紫外殺菌、圖形藝術、光化學匹配,UVEPRO測量,光刻膠曝光,固化油墨,粘合劑和涂料。
*微處理器電路提供高可靠性和耐用性。
*獨立的紫外探測器允許用戶在位置測量紫外線光。
* Type K,J型熱電偶溫度計。
*SD記憶卡實時數據記錄器,它內置時鐘和日歷,實時數據記錄器,采樣時間從1秒到3600秒。
*手動采集數據是可用的(設定采樣時間為0),在執行手動數據采集器的功能,可以設置不同的位置沒有(1位到99位)。
*創新和易于操作,計算機不需要設置額外的軟件,在執行數據采集后,只需要把SD卡從儀器拔出并將SD卡插入電腦,就可以下載的所有測量值和時間信息(年/月/日/時/分/秒)到Excel,然后用戶可以自己進行進一步的數據或圖形分析。
* SD卡容量:1 GB到16 GB。
* LCD背光燈綠色,易于閱讀。
*能自動關機或手動關機。
*數據保持,記錄和最小讀數。
*微機電路,高精度。
*UM3/AA ( 1.5 V ) x 6 電池或直流9V適配器提供電源。
* RS232/USB電腦接口。
記錄型紫外線強度計UVC-254SD參數規格
Circuit | Custom one-chip of microprocessor LSI circuit. | |
Display | LCD size : 52 mm x 38 mm LCD with green backlight ( ON/OFF ). | |
Measurement | UV Light : UVC Type K/J thermometer | |
UVC Sensor spectrum cover range | Please refer to the attach spectrum diagram. | |
UVC 'sensor structure | The exclusive UVC photo sensor with the cosine correction filter. | |
UVC light zero adjustment | By push button. | |
Memory with Recall | Records Maximum & Minimum reading with recall. | |
Datalogger Sampling Time Setting range | Auto | 1 second to 3600 seconds @ Sampling time can set to 1 second, but memory data may loss. |
Manual | Push the data logger button once will save data one time. @ Set the sampling time to 0 second. @ Manual mode, can also select the 1 to 99 position ( Location ) no. | |
Memory Card | SD memory card. 1 GB to 16 GB. | |
Advanced setting | * Set clock time ( Year/Month/Date, Hour/Minute/ Second ) * Decimal point of SD card setting * Auto power OFF management | |
Advanced setting | * Set beep Sound ON/OFF * Set thermometer type to Type K or Type J * Set temperature unit to ℃ or ℉ * Set sampling time * SD memory card Format | |
Temperature Compensation | Automatic temp. compensation for the type K/J thermometer. | |
Data Hold | Freeze the display reading. | |
Memory Recall | Maximum & Minimum value. | |
Sampling Time of Display | Approx. 1 second. |
RS 232/USB PC computer interface. * Connect the optional RS232 cable UPCB-02 will get the RS232 plug. * Connect the optional USB cable USB-01 will get the USB plug. | ||
Operating Temperature | 0 to 50 ℃. | |
Operating Humidity | Less than 85% R.H. | |
Power Supply | * Alkaline or heavy duty DC 1.5 V battery ( UM3, AA ) x 6 PCs, or equivalent. | |
* DC 9V adapter input. ( AC/DC power adapter is optional ). | ||
Power Current | Normal operation ( w/o SD card save data and LCD Backlight is OFF) : Approx. DC 6.5 mA. | |
When SD card save the data but and LCD Backlight is OFF) : Approx. DC 30 mA. | ||
* If LCD backlight on, the power consumption will increase approx. 16 mA. | ||
Weight | Meter | 351 g. |
UVC sensor | 103 g. | |
Meter | 177 x 68 x 45 mm | |
UVC probe | 38 mm DIA. x 25 mm | |
Accessories Included | * Instruction manual. 1 PC * UVC light sensor. 1 PC * Hard carrying case, CA-06 1 PC | |
Optional Accessories | SD Card ( 2 GB ) Type K thermocouple probe. AC to DC 9V adapter. USB cable, USB-01. RS232 cable, UPCB-02. Data acquisition software,SW-U801-WIN. Excel data acquisition software,SW-E802. |
所有評論僅代表網友意見,與本站立場無關。