規格/機型 Specifications / models | 單位 Company | Y-500 | Y-630 | Y-800 |
工作臺尺寸Workbench size | mm | 500 x 500 | 630 x 630 | 800 x 800 |
大負荷Maximum load | kg | 500 | 1000 | 1200 |
三軸行程 X/Y/Z-axis stroke | mm | 900/750/650 | 1000/850/750 | 1190/1020/1050 |
主軸鼻端至臺面 Distance between spindle nose to worktable | mm | 230-810 | 160-910 | 50-1100 |
主軸鼻端到工作臺面距離 Distance between spindle nose to worktable | mm | 110-860 | 110-960 | 152-1172 |
主軸規格 Spindle specifications |
| BT50 | BT50 | BT50 |
主軸直徑 Spindle diameter | mm | (P190 | 0190 | 4190 |
主軸轉速Spindle speed | rpm | 40-6000 | 40-6000 | 40-6000 |
三軸切削進給速率Triaxial Cutting feed rate | mm/min | 10-15000 | 10-15000 | 10-15000 |
三軸快速移動X/Y/Z Triaxial Fast moving speed X/Y/Z | m/min | 30 | 30 | 30 |
定位精度 Positioning accuracy | mm | ±0.005/300 | ±0.005/300 | ± 0.005/300 |
重復定位精度 Re-positioning accuracy | mm | ±0.003 | ±0.003 | ±0.003 |
主軸驅動馬達 Spindle driving motor | kw | 11/15 | 11/15 | 11/18.5 |
X,Y,Z驅動馬達 X,Y,Z driving motor | kw | 3/3/3 | 3/3/3 | 4.5/3Z4.5 |
占地面積(長 x 寬 x 高)Floor area(Length x width、height) | mm | 4280x3000x2600 | 5900x3500x3563 | 7875 x 4600 x 3405 |
整機重量(約)Total Weight(approximately) | kg | 8000 | 8500 | 13000 |
Y系列臥式加工中心
Y系列臥式加工中心
機床特點:
1、臥式加工中心其機械結構與立式加工中心的機械結構剛好相反，主軸采用臥式結構進行加工。工作臺還可以進行360度旋
轉，可實現一次裝夾多面加工。
2、可以配備大容量的刀庫進行立式加工中心機不可能加工的零件。
3、可適應于高要求的深腔體的模具加工和各類箱體內零件加工，效率和精度及穩定性上比立式加工中心要更勝- -籌。
Machine tool features:
1. The mechanical structure of the horizontal machining centre is the opposite of the mechanical structure of the vertical machining
centre. The main shaft is processed by horizontal structure. The working table can also be rotated 360 degrees, and also can be
realized multi- -side processing at one time clamping.
2. It can be equipped with a large- capacity tool changer to process the parts whichcan't be machined by vertical machining centre.
3. It can be adapted to the high requirements of deep cavity mould machining and all kinds of box internal processing, its eficiency,
precision and stability are better than that of the vertical machining centre.
所有評論僅代表網友意見，與本站立場無關。