全自動固相萃取儀技術指標

產品介紹：
AUTOSPE600S固相萃取儀是利用固體吸附劑將液體樣品中的目標化合物吸附,與樣品的基體和干擾化合物分離,然后再用洗脫液洗脫或加熱解吸附,達到分離和富集目標化合物的目的（即樣品的分離，凈化和富集），目的在于降低樣品基質干擾，提高檢測靈敏度，其應用于各類食品安全檢測、農產品殘留監控、醫藥衛生、環境保護、商品檢驗、自來水及化工生產實驗室。
主要特點：
1、處理大體積樣品，樣品體積范圍為20mL-20L；
2、自動選擇五種溶劑進行SPE柱的活化、清洗、洗脫；
3、可同時進行柱萃取及盤式萃?。ㄝ腿≈?ml，3ml，6ml；萃取盤：47mm直徑）；
4、具有6個萃取通道，可同時萃取6個樣品；
5、四種不同規格的收集瓶架可選，適應不同的搜集體積；
6、支持雙柱聯用的應用，適合復雜樣品分析； 
7、十二通閥采用全新的非金屬材質，可兼容酸堿；
8、軟件可存儲任意種方法，調出即用，自動設置； 
9、儀器預存有10個系統校準方法，保證儀器的一致性；
10、軟件具有樣品管理與儀器管理功能，應用更方便；
11、滿足EPA方法中水樣測試認可標準方法 ，通用性高；
12、水相和有機相廢液分別通過排放管道排出，避免污染 ；
13、沒有單向閥，不必?fù)?dān)心少量的懸濁液會堵塞泵；
14、可以進行地下水、地表水、廢水、果汁等（甚至含有懸浮物）的液體樣品的萃??；
15、注射泵進行洗脫，具有高度的重復性；
16、導入空氣吹掃溶劑，避免溶劑之間干擾；
17、軟件可以實時顯示儀器工作狀態，便于調整操作；

技術參數：
1、氣體壓力：輸出：0-30psi（0-1.4bar） 輸入：zui大100psi（6.9bar）；
2、注射泵：Air注射器：1個10ml注射器  LH注射器：1個10ml注射器；
3、換向閥：非金屬12通閥；
4、泵流量：每通道0-40ml/min；

Product introduction:
AUTOSPE600S solid-phase extraction apparatus is using solid adsorbent adsorption target compounds in liquid samples, matrix and interference with the sample of compound separation, next reoccupy eluent elution or heat desorption, reach the purpose of separation and enrichment of the target compounds (namely sample separation, purification and concentration), the purpose is to reduce the sample matrix interference, improve the detection sensitivity, applied to all kinds of food safety testing, agricultural residue monitoring, medicine, health, environmental protection, commodity inspection, tap water and chemical production laboratory.
Main features:
1. To handle large volume samples, the volume range of the sample is 20mL- 20L;
2. Automatic selection of five solvents for activation, cleaning and washing of SPE column;
3. Column extraction and disk extraction can be carried out simultaneously (extraction column: 1ml, 3ml, 6ml; Extraction disc: 47mm diameter);
4. With 6 extraction channels, 6 samples can be extracted simultaneously.
5. Four different types of collection bottles can be selected for different collection volume;
6. Support the application of double column interconnection, suitable for complex sample analysis;
7. The 12-pass valve adopts brand new non-metallic material, which can be compatible with acid base.
8. The software can store any kind of methods, make out of play, automatic Settings;
9. The instrument has 10 system calibration methods to ensure the consistency of the instrument.
10. The software has the function of sample management and instrument management, which is more convenient;
11. Satisfied the standard method of water sample test in the EPA method, with high universality;
12. Water phase and organic phase waste are discharged through dedicated exhaust pipes to avoid pollution;
13. There is no one-way valve, not to worry that a small amount of suspension will block the pump;
14. The extraction of liquid samples of groundwater, surface water, wastewater, fruit juice and other (even suspended objects) can be carried out;
15. The syringe pump is cleaned and is highly repetitive;
16. Import air to purge solvent and avoid interference between solvents;
17. The software can display the state of the instrument in real time to facilitate the adjustment of operation;
Technical parameters:
1. Gas pressure: output: 0-30psi (0-1.4 bar) input: maximum 100psi (6.9 bar);
2. Injection pump: Air syringe: 1 10ml syringe: 1 10ml syringe;
3. Reversing valve: non-metal 12-pass valve;
4. Pump flow: 0-40ml/min per channel;