ABB熱式氣體質量流量計 返回列表頁

ABB熱式氣體質量流量計

Sensyflow FMT200-D is for direct mass and standard volume flow measurement of compressed air and biogas. The measurement is independent of operating pressure and temperature. With turndown ratio of 1:100, it allows metering and leakage detection together in one instrument.

Overview

The flowmeter sensor uses the hot film anemometer working principle. This method allows for direct measurement of the gas mass flow. As a result, the normally necessary pressure and temperature compensation and, thus, additional measuring points and the compensation computer can be omitted.

Sensyflow FMT200-D plus the corresponding pipe components are installed in a defined way and locked in place as a component of the measuring pipe.

The flowmeter includes the sensor unit and the evaluation electronics which directly provides a linearized output signal. The device is calibrated and ready for operation. An LCI adapter is used to parameterize the output signal.

A standard power supply unit can be used for powering the device.

Data

• Threaded pipe connections
  – DN 25 to 80 (1 to 3 in.)
• ABB熱式氣體質量流量計
• Output 0/4 to 20 mA
  – directly from sensor head
• High measuring accuracy
  – < 2 % of rate
• Low pressure drop
  – 10 mbar (1kPa)

該產品由深圳市銀飛電子科技有限公司提供，銷售商地址位于廣東省深圳市福田區華強北路群星廣場A座22樓2217。請您仔細閱讀產品使用說明書，正確使用。

銀飛電子主要銷售通訊設備、儀器儀表、電力設備、熱工儀表、校準設備及工具配件。