Universal IV系列射頻導納連續物位計 返回列表頁

Universal IV系列射頻導納連續物位計

Overview The Universal IV™ Series is the fourth generation RF continuous system built on Drexelbrook’s 50 years of experience in level measurement. The product is backward compatible with the industry standard Universal III™, Univeral Lite™, Universal II™ and RCT™ Series and is the ideal solution for a wide array of applications. A few enhancements to the Universal IV Series include worldwide hazardous location approval, standard display/keypad, autoranging capabilities and state of the art stable and accurate measurement. Pro Model The Universal IV™ Pro model integrates the RF Admittance technology pioneered by Drexelbrook with the versatility of Cote-Shield™ technology that ignores coatings on the probe and measurement span of 1" to 800'. The Pro is compatible with a vast array of applications: conductive, insulating, and heavy or light coating. Lite Model The Universal IV™ Lite model is the entry level RF Capacitance measurement system without Cote-Shield™ capabilities. Lite models can be used in non-coating conductive liquids and insulated coating applications where Cote-Shield™ is not required. In addition, the Lite model offers a measurement range up to 20' typically.

Universal IV系列射頻導納連續物位計

Features and Benefits:

• Proven Drexelbrook level solution for the most common to the most challenging applications
• The most versatile level technology for liquids, slurries, interface and granules measurement
• Over 125 probe types for a wide array of applications, flex, rigid, wetted materials and process connections
• 2-wire, 4-20mA loop transmitter with the widely accepted digital HART protocol
• Process temperature from cryogenic to 1000°F (537°C)
• Process pressure from vacuum to 10,000 PSI (690 BAR)
• Measurement span as short as 1” (25mm) to 800 ft (244m), no dead zone or blocked measurement areas
• Proven Cote-Shield™ technology that ignores coating build-up on the probe
• Immune to vapor, dust and foam interference
• Immune to tank obstructions such as nozzles, ladders, pipes and agitators
• Low cost of ownership, no maintenance, and no moving parts to wear out
• Stable, repeatable, and accurate measurement within 0.25% of range
• Built-in isolation and surge protection for increased reliability
• Easy one-time calibration, configure it once and go
• Free PC-based HRTWIN™ configuration software for initial setup from anywhere on the loop or a handheld HART®communicator can be used
• Standard user friendly push-button LCD display for configuration and monitoring
• Integral and remote installation. The transmitter can be integrated with the probe, or for harsh environmental conditions it can be installed remoy away from the probe/vessel
• Worldwide approvals: FM, FMc, ATEX, IECEx and CE mark
• Hazardous location approvals, Intrinsic Safety (IS) and Explosion Proof/Flameproof for Class I, Div I, and Zone 0 installations
• Fully backward compatible with Drexelbrook’s leading products such as Universal III, Universal Lite and RCT series
• 50+ years of Drexelbrook applications knowledge that ensures the right solution for your application

Specs

Technology
RF Admittance / Capacitance

Supply Voltage
13-30VDC, 2-wire loop powered

Ouput/Digital Protocol
4-20mA, HART 
Compatible with HART®
HART device description available

Load Resistance
Maximum 550 ohms at 24 VDC
Minimum 250 ohms for HART protocol

Ambient Temperature
-40°C to 75°C  (-40°F to 167°F)

Process Temperature
-106°C to 815°C  (-160°F to 1500°F), probe dependent

Process Pressure
Vacuum to 1350 bar (20,000 psi), probe dependent

Process Connection
NPT, BSP, JIS, ANSI, DIN, Grayloc, Tri-Clamp, Perlick Fitting and more upon request

Main Wetted Parts
316L, PVDF, TFE, FEP, PFA, HasloyC, Monel and more depending on applications requirements. Consult factory

Sensor Length
1” to 800 Feet (25.4mm to 244m)
Probe, Pro and Lite model dependent

Capacitance Measurement Range
Autoranging  (6 ranges)
1-45,000 pF  (Pro model)
20-7,000 pF (Lite model)

Cote-Shield™
Pro model: Coating rejection with 100Khz or 15Khz and 45° phasing 
Lite model: 100Khz or 15Khz without phasing for insulating coating or conductive non-coating applications only

Integral or Remote Configuration
100 ft max cable length for remote configuration

Accuracy
0.25% of span (ranges 2-6)
Includes the effects of linearity, hysteresis and repeatability on electronics only

Response Time to Level Changes
350 msec nominal (no damping applied)
1-90 seconds programmable damping time

Supply Voltage Effect
0.2% of full scale max

Temperature Effect
0.5% per 100°F (37.7°C) change

Start-Up Time
< 12 seconds

Configuration and Calibration
Standard LCD display and keypad on all models
HRTWIN™ PC-based software 
Or third party Model 275, 375, 475 handheld communicator

Emission and Surge Protection
Compliant with IEC6100-4.2, 3, 4, 6, 8
Compliant with CISPR11 Group I, Class B

該產品由深圳市銀飛電子科技有限公司提供，銷售商地址位于廣東省深圳市福田區華強北路群星廣場A座22樓2217。請您仔細閱讀產品使用說明書，正確使用。

如果想試用該產品，請本單位：

銀飛電子主要銷售通信設備、儀器儀表、電力設備、熱工儀表、校準設備及工具配件。有多功能多產品校準器、電能功率校準器、活塞式壓力計（氣體、高壓、液體、真空）、多功能電氣安全校準器、示波器、頻率計、萬用表、阻抗分析儀、功率計、LCR數字電橋、音頻分析儀、電容測試儀、電感測試儀、安規測試儀、直流電阻測試儀、網絡分析儀、頻譜儀、任意波形發生器、溫度校準儀、數字測溫儀、信號發生器、電源、電子負載、綜合測試儀、信號源、濾波器測試儀、材料試驗機、溫度傳感器、熱像儀、變壓器測試儀、噪聲源、視頻分析儀、過程校準儀、溫度巡檢儀、超級測溫電橋、黑體爐、射頻導納物位開關、多點物位開關、音叉開關、射頻導納連續物位計、雷達液位計、超聲波液位計、油中水含量分析儀、液位測量系統、磁致伸縮液位計、非接觸固體雷達、壓力傳感器、過程表、壓力變送器、氣動控制器、高純壓力開關、隔膜片、沖液表、計量表膜片密封、材料實驗機、食品質構儀、硬度實驗機、數字測力計、PETPLUS特性粘度儀、布氏光學掃描系統、洛氏布硬度實驗機、全自動顯微硬度試驗機、布氏硬度試驗機、電動試驗平臺、單柱材料試驗系統、雙柱材料試驗系統、浮球活塞壓力計、船用溫度壓力校驗儀、點位測量系統、超聲波開關、油/水界面開關、在線流體檢測開關、多點開關、平板開關、浮頂罐溢出保護開關、空氣加熱器、織物加熱套、電加熱帶、硅橡膠加熱毯、圓桶加熱器、IBC加熱器、氣體加熱器、灰斗加熱系統、自限溫電伴熱帶、恒功率電伴熱帶、恒功率電伴熱帶、覆套式電阻加熱器、電阻絲、溫度控制器、危險環境加熱器及控制、復合材料修補儀、真空修補/處理平臺、A320升降舵無損檢驗包；靜電放電干擾模擬器、雷擊浪涌干擾模擬器、周波跌落模擬器、輻射抗擾度系統、脈沖群干擾模擬器、傳導抗擾度測試系統、傳導干擾測試系統、輻射干擾測試系統等儀器。