Clearline 傳感器 返回列表頁

Clearline 傳感器

Clearline In-Line Fluid Detector

Overview

The ClearLine level switch employs a unique sensor that mounts directly into the process piping. The sensor does not interfere with the material flow and does not contribute to plugging the way insertion type sensors do. The ClearLine is ideal for pump protection to prevent run dry damage as well as empty vessel indication。

Electronics

Power requirement:
120 ± 25 Vac, 50/60 Hz, 1 watt
240 ± 50 Vac, 50/60 Hz, 1 watt (optional)
12-30 Vdc 1 watt (optional)

Ambient temperature:
-40°F to 140°F (-40°C to 60°C)

Level Output:
DPDT relay

Clearline 傳感器

Contact Rating:
120 Vac; 5A non-inductive, 3 A inductive
230 Vac; 5A non-inductive, 2 A inductive
24 Vdc; 5A non-inductive
Min. Rating 100mA / 12VDC

Time Delay:
Adjustable 0-120 sec, for pump start/stop.

Fail-safe
Empty-pipe fail-safe (factory set); relay will de-energize, indicating empty pipe upon loss of power.

RFI Protection (built in):
The operating point for unit in housing is unaffected by 5W field @ 27 MHz, 150 MHz, or 450 MHz at a distance of 5 ft. from exposed sensor, cable, or power line.

Standard housings:
NEMA 1-5 and 12 Explosionproof for Class I, Groups A, B, C, D, and Class II, Groups E, F, G (Div. 1 and 2).

Optional Housing:
NEMA 4 with red and green indicating lights.

Sensor

Process temperature/pressure:
340°F max @ 100 PSI max

Material compatibility:
Process-wetted parts: 316L SS & TFE

Mounting:
See chart below - column (11)

Measuring Cable:
4-terminal coaxial cable, 10 ft. standard; 160°F max. temp. limit; less than 5/8” O.D. at largest point.

Hazardous Areas:
Sensing element and cable are intrinsically safe for Class I, Groups A, B, C, D, Division 1 and 2; and Class II, Groups E, F, G, Division 1 and 2.