0331burkert 0331電磁閥的詳細資料

burkert 0331電磁閥 The Type 0331 is a direct-acting 3/2-way pivoted armature solenoid valve for sub-base mounting. The magnetic system and the Medium chamber are separated from one another by a separating diaphragm system.burkert 0331電磁閥 The valve is fast acting and has a long service life, even when run dry.

特點：

1. 3通電磁閥與電樞轉動和手動控制
2. 直接作用與分離隔膜
3. 快速反應
4. 使用壽命長，即使在無潤滑條件
5. 用于液體，氣體和腐蝕性介質

參數：

Orifi ce DN 2.0–3.0 mm
Body and seat materials Brass and stainless steel 1.4401
Coil material Epoxy
Coil insulation class H
Seal material NBR, FKM (EPDM on request)

Medium
 NBR
 FKM
 EPDM (on request)
Neutral Medium such as compressed air, water,
hydraulic oil
Hot air
Oil and fat-free Medium
Medium temperature
 NBR
 FKM
 EPDM (on request)

0 to +80 °C
0 to +90 °C
– 30 to +90 °C
Ambient temperature Max. +55 °C (min. temperature see Medium temperature)
Viscosity max. 37 mm2/s
Voltage tolerance ±10%
Duty cycle 99% continuous rating
Manifold mounting Use reduced duty cycle or 5W coil

Electrical connection Tag connector acc. to DIN EN 175301-803 Form A
(previously DIN 43650) for cable plug Type 2508
(supplied as standard)
Protection class IP 65 with cable plug
Installation as required, preferably with actuator upright 
尺寸圖：